Hanger Kit Installation - Honda EB10000 Owner's Manual

ASSEMBLY

Hanger Kit Installation

1. Remove the center beam.
2. Loosely install the hanger to the center beam using the hanger
bracket and two 8
3. Reinstall the center beam. Make sure to tighten the four 8
bolts securely.
4. Position the hanger at the generator's center, and tighten the two 8
20 mm bolts securely.
TORQUE: 14 19 lbf·ft (20 25 N·m , 2.0 2.6 kgf·m)
84
20 mm flange bolts.
8 20 mm FLANGE BOLT (2)
HANGER BRACKET
CENTER BEAM
HANGER
16 mm
8 16 mm
FLANGE BOLT (4)