Adding A Site; Modifying A Site; Removing A Site; Event Setup - Honeywell HRDE4X4 User Manual

Adding a Site

1. Click Addition in the Setup Menu window.
2. Enter the Site Name, IP Address, Port No., Protocol, and Password, as necessary.
3. Click OK.
Note If you want to rename a channel, then double-click the channel Name.

Modifying a Site

1. Click Modify in the Setup Menu window.
2. Enter the new information as necessary.
3. Click OK.

Removing a Site

1. Select the site in the Setup Menu window.
2. Click Remove. The site disappears from the list.
3. Click OK to remove the site from the list.
If you click CANCEL, then the site will not be removed from the list. When you re-open
the Setup Menu, that site will be in the list.

Event Setup

Click Event on the left-hand panel of the Setup menu. In the Event menu (see
you can set the event items to be included in the event list and log, the amount of local disk
space you want to allow, and the save path for the event log.
Figure 7-4

Event Search Setup

Click Event Search on the left-hand panel of the Setup menu to access the Event Search
menu.
Rev 3.01

Event Menu

51
Figure 7-4)
Document 900.0399
08/08