Update Software; Check Software Version; Update Software Through Usb - Philips HTS3563 User Manual

7

Update software

Philips continually tries to improve its products.
To get the best features and support, update your
home theater with the latest software.
Compare the version of your current software
with the latest version on www.philips.com/
support. If the current version is lower than the
latest version available on the Philips support
website, upgrade your home theater with the
latest software.
Caution
•
Do not install a lower version of software than
the current version installed on your product.
Philips is not liable for problems caused due to
software downgrade.

Check software version

Check the version of the current software installed
on your home theater.
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Advanced] > [Version information].
» The software version is displayed.
•
The last two digits indicate the current
version of the onscreen help installed
on your home theater. For example,
if the current version of the software
is 'Subsystem SW: 35-00-00-05', '05'
represents the current version of
onscreen help installed on your home
theater.
EN
26

Update software through USB

What you need
•
A USB flash drive that is FAT or NTFS-
formatted, with at least 75MB of memory. Do
not use a USB hard drive.
•
A computer with Internet access.
•
An archive utility that supports the ZIP file
format.
Step 1: Download the latest software
1
Connect a USB flash drive to your computer.
2
In your web browser, go to www.philips.com/
support.
3
At the Philips Support website, find your
product and locate the Software and drivers.
» The software update is available as a zip file.
4
Save the zip file in the root directory of your
USB flash drive.
5
Use the archive utility to extract the software
update file in the root directory.
» The files are extracted under the UPG_
ALL folder of your USB flash drive.
6
Disconnect the USB flash drive from your
computer.
Step 2: Update the software
Caution
•
Do not switch off the home theater or remove
the USB flash drive during the update.
1
Connect the USB flash drive containing the
downloaded file to your home theater.
•
Make sure that the disc compartment is
closed and no disc inside.
2
Press (Home).
3
Select [Setup], and then press OK.
4
Select [Advanced] > [Software update] >
[USB].
5
Follow the onscreen instructions to confirm
the update.
» Once complete, the home theater
automatically switches off and restarts. If
it does not, disconnect the power cord
for a few seconds and then reconnect it.