Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
SOUND SETTINGS.
Press
2
Select SURROUND, and then press OK.
3
Press the Navigation buttons (up/down) to
select a setting on the display:
•
AUTO: Surround sound based on the
audio stream.
•
MULTI-CH: Immersive multi-channel
sound for an enhanced movie
experience.
•
STEREO: Two-channel stereo sound. Ideal
for listening to music.
4
Press OK to confirm.
6
Change settings
The home theater settings are already configured
for optimal performance. Unless you have a reason
to change a setting, we recommend that you keep
the default setting.
Note
•
You cannot change a setting that is grayed out.
•
To return to the previous menu, press
BACK. To exit the menu, press
Language settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
•
[Menu language]: Select a display
language for menu.
•
[Audio]: Select an audio language for
discs.
•
[Subtitle]: Select a subtitle language for
discs.
•
[Disc menu]: Select a menu language for
discs.
Note
•
If your preferred disc language is not available,
select [Others] from the list, and enter the
4-digit language code found at the end of this
user manual (see 'Language code' on page 35).
•
If you select a language that is not available on a
disc, the home theater uses the default language
of the disc.
(Home).
EN
23