Wireless-B Broadband Router
The Front Panel
The Router's LEDs, where information about network activity is displayed, are located on the front panel.
Figure 3-2: The Broadband Router's Front Panel
Power
Green. The Power LED lights up and will stay on while the Router is powered on. When the
Router goes through its self-diagnosis mode during every boot-up, this LED will blink, then
stop when the diagnosis is complete.
Wireless-B
Green. The Wireless-B LED lights up when there is a wireless connection. If the LED is
blinking, the Broadband Router is actively sending or receiving data over the network.
1, 2, 3, 4
Green. These numbered LEDs, corresponding with the numbered ports on the Broadband
Router's back panel, serve two purposes. If the LED is lit up solid, the Broadband Router is
connected to a device through that port. A blinking LED indicates network activity over that
port.
Internet
Green. The Internet LED indicates when a connection is made through the Internet port.
Chapter 3: Getting to Know the Wireless-B Broadband Router
The Front Panel
7