Table of Contents
Advertisement
E5918AD(EN).qx3
04.4.2
PLAYING A DISC
•
The system can recognize up to 255 groups/ folders
and up to 512 tracks/ files, and this applies even to the
case where mixed MP3 and JPEG files are recorded.
• Up to 8 hierarchies can be created.
• If a JPEG file is selected, the image will be reproduced
from the selected track and go to the next one in turn.
A track is displayed for five seconds and then the next
track is displayed.
Each press on the Cursor button B will rotate the
image clockwise by 90 degrees when an image is dis-
played.
Each press on the Cursor button s will rotate the
image counterclockwise by 90 degrees.
For best results use files recorded at these specifications:
[MP3]
• Sampling frequency: 44.1kHz or 48kHz
• Constant bit rate: 112kbps ~ 320kbps.
[JPEG] size of image
• Upper limit: 6,300 x 5,100 dots.
• Lower limit: 32 x 32 dots.
Slide Show Mode (JPEG)
You can switch to the slide show mode during playback.
1
Press MODE during playback.
• The slide show mode screen will appear.
• The slide show mode cannot be switched when it is
stopped, or from the file list screen.
2
Press ENTER.
• The slide show mode will change.
CUT IN/OUT:
The entire image appears in one time.
FADE IN/OUT: The image appears gradually and then
disappears.
3
Press MODE to exit.
On-Screen Information
You can check each file during playback.
1
Press DISPLAY.
• The name of the file currently in play will be displayed.
2
Press DISPLAY again to show the track number, the
elapsed time, the repeat status, and the playback status
at the top of the screen.
•
will be displayed when the repeat play has been
selected.
T - indicates Track repeat
G - indicates Group (folder) repeat
A - indicates Disc repeat
3
Press DISPLAY again to exit.
Program Playback (MP3 / JPEG)
This feature allows you to program an MP3 disc to play in a
desired sequence.
1
In STOP mode, press MODE.
• The PROGRAM screen will appear.
2
Press K or L to select a track, then press ENTER to
save it in a program.
• Press CLEAR to erase the incorrect input.
3
Press B B to start programmed playback.
NOTE:
• To erase all programs at once, select "ALL CLEAR" and
press ENTER at step
6:49 PM
Page 15
JPEG
MP3
JPEG
MP3
JPEG
2
.
Random Playback (MP3 / JPEG)
1
Press MODE twice while playback is stopped.
2
Press B B to play the tracks in random order.
Audio Language
The DVD player allows you to select a specific language
during DVD disc playback when multiple languages are avail-
able.
1
Press AUDIO during playback.
2
Press AUDIO repeatedly to select your desired language.
NOTES:
• If your language is not shown after pressing AUDIO sev-
eral times, the disc may not have that language.
However, some discs allow you to change audio lan-
guage or subtitle language setting in the disc menu.
(Operation varies depending on the disc, so refer to the
manual included in the disc.)
• If you choose a Language that has a 3 letter language
code, the code will be displayed every time you change
the Audio language setting. If you choose any other lan-
guages, "---" will be displayed instead. (Refer to page
19.)
Stereo Sound Mode
1
Press AUDIO repeatedly during playback to select
between "STEREO", "L-CH" or "R-CH".
STEREO - both right and left channels are active
L-CH - only left channel is active
R-CH - only right channel is active
NOTES:
• If the Virtual Surround setting is "1" or "2", the sound mode
will be fixed to "STEREO", and can not be changed.
• This function is not available on DTS-CD.
Subtitle Language
The DVD player allows you to select a language for subtitle
(if available) during DVD disc playback.
1
Press SUBTITLE during playback.
2
Press SUBTITLE repeatedly to select your desired subti-
tle language.
• The selected language will be displayed on the display
bar at the top of the screen.
3
To turn off subtitles, press s or B until "OFF" appears.
NOTES:
• If your language is not shown after pressing SUBTITLE
several times, the disc may not have that language.
However, some discs allow you to change audio lan-
guage or subtitle language setting in the disc menu.
(Operation varies depending on the disc, so refer to the
manual included in the disc.)
• If you choose a Language that has a 3 letter language
code, the code will be displayed every time you change
the Subtitle language setting. If you choose any other
languages, "---" will be displayed instead. (Refer to page
19.)
– 15 –
MP3
JPEG
DVD
VCD
CD
DVD
EN
Advertisement
Table of Contents
