Installation; Grounding And Shielding - Honeywell P520 User Manual

P520 SIGNAL PROCESSOR
5-1/16
(129)
35/64
(14)

INSTALLATION

When Installing this Product...
1. Read these instructions carefully. Failure to follow them
could damage the product or cause a hazardous
condition.
2. Check the ratings given in the instructions and on the
product to make sure the product is suitable for your
application.
3. Installer must be a trained, experienced, flame safe-
guard control technician.
4. After installation is complete, check out product opera-
tion as provided in these instructions.
66-2066—01
4-3/16 (106)
5-1/16
(129)
Fig. 1. P520 front faceplate dimensions.
9-3/32 (231)
Fig. 2. P520 side view dimensions.

Grounding and Shielding

NOTE: Installer must be a trained, experienced flame
1. Connect a safety ground to the viewing head housing (if
2. The viewing head and all associated cable/conduit must
2
M33219
safeguard service technician and should be
familiar with the equipment operation and limita-
tions and be aware of any applicable local codes
and regulations.
applicable).
be at least 12 inches (31 cm) from any source of high
energy or voltage (for example, igniter equipment).
M33226