Steps; Service Modes Of The Hg520S - Huawei EchoLife HG520s User Manual

The transmission between the HG520s and the DSLAM is based
on the asynchronous transfer mode (ATM). In the service configuration
of the HG520s, you need to configure parameters, for example, the
permanent virtual channel (PVC).

3.1.2 Steps

The service modes of HG520s can be realized by configuring the
corresponding working parameters.
The steps to realize a service mode are described as follows.
Step To...
Establish the
1
configuration
environment
Configure the
2
HG520s
Configure your
3
computer
Note:
DHCP = Dynamic Host Configuration Protocol

3.2 Service Modes of the HG520s

The HG520s supports multiple service modes and the
configuration of the DSLAM at the office end should be considered
Do...
Refer to 2.3 "Establishing Configuration
Environment."
(1) Select the PVC to be configured.
(2) Select the service mode of this PVC and
configure the parameters of the PVC.
(3) Configure functions
requirements.
For example, configure the DHCP function.
(4) Save the configuration and reboot the
HG520s.
Configure the parameters of the network card for
the computer or install the dial-up software in the
computer according to the service mode of the
HG520s.
12
according to the