Installation - Electrolux EON33100 User Manual

Hide thumbs Also See for EON33100:
Table of Contents

Advertisement

Problem
The oven does not heat up
The oven lamp does not operate The oven lamp is defective
Steam and condensation settle
on the food and in the oven cav-
ity
The display shows "12.00"
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

Warning! Refer to "Safety information"
chapter.
Possible cause
The fuse in the fuse box is re-
leased
You left the dish in the oven for
too long
A power cut
=
Control the fuse. If the fuse is re-
leased more than one time, re-
fer to a qualified electrician.
Replace the oven lamp
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
Reset the clock
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the oven cavity.
.........................................
.........................................
.........................................
Important! The built-in unit must meet the
stability requirements of DIN 68930.
electrolux 19
Remedy
min.
50mm
=

Advertisement

Table of Contents
loading

Table of Contents