Advertisement

Quick Links

INSTR
INSTR UCTION BOOKLET
INSTR
INSTR
INSTR
KULLANMA
KULLANMA
KULLANMA VE MONT
KULLANMA
KULLANMA
35688-3803
Gas hob - Ankastre ocak
UCTION BOOKLET
UCTION BOOKLET
UCTION BOOKLET
UCTION BOOKLET
VE MONT
VE MONT
VE MONT AJ KILA
VE MONT
Mod. EHG 6763 X
AJ KILA
AJ KILA
VUZU
VUZU
AJ KILA VUZU
VUZU
AJ KILA
VUZU
CZ-HR-RO-SI-SK-TR

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux EHG 6763 X

  • Page 1 INSTR INSTR UCTION BOOKLET KULLANMA KULLANMA VE MONT VE MONT AJ KILA AJ KILA VUZU VUZU KULLANMA VE MONT VE MONT AJ KILA AJ KILA VUZU VUZU KULLANMA KULLANMA VE MONT AJ KILA VUZU Mod. EHG 6763 X 35688-3803 CZ-HR-RO-SI-SK-TR...
  • Page 3: Important Safety Information

    Important Safety Information These warnings are provided in the interest of safety. You read them carefully before MUST installing or using the appliance. About Installation, Cleaning and Maintenance malfunctioning. Refer to your local Service Centre. • It is mandatory that all operations required for the Always insist on genuine spare parts.
  • Page 4: Table Of Contents

    Contents For the Installer For the User Important Safety Information Instruction for the Installer Instruction for the User Technical Data Cleaning and Maintenance Gas connection Service and original Spare Parts Electrical Connection Adaptation to different types of gas Building In Guide to Use the instructions The following symbols will be found in the text to guide you throughout the Instructions:...
  • Page 5: Instruction For The User

    Instruction for the User Once the hob has been installed, it is important to remove any protective materials, which were put on in the factory. Hob burners control knobs The hob burners control knobs are situated on the hob right hand side. The symbols on the knobs mean that: there is no gas supply there is maximum gas supply there is minimum gas supply...
  • Page 6: Cleaning And Maintenance

    Cleaning and Maintenance Disconnect the appliance from the electrical supply, before carrying out any cleaning or maintenance work. General cleaning Wash the enamelled components with warm soapy water. Never use abrasive cleaners Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food.
  • Page 7: Instruction For The Installer

    Instruction for the Installer The following instructions about installation and maintenance must be carried out by qualified personnel in compliance with the regulation in force. The side walls of the unit in which the hob is going to be installed, must not exceed the height of the working top.
  • Page 8: Gas Connection

    Gas connection Choose fixed connections or use a flexible pipe in stainless steel in compliance with the regulation in force. If using flexible metallic pipes, be careful they do not come in contact with mobile parts or they are not squeezed.
  • Page 9: Electrical Connection

    Electrical Connection The following instructions about installation RIGID COPPER PIPE OR must be carried out by qualified personnel in FLEXIBLE PIPE IN STAINLESS compliance with the regulation in force. STEEL The appliance is designed to be connected to 230 V monophase electricity supply.
  • Page 10: Adaptation To Different Types Of Gas

    Adaptation to different types of gas Injectors replacement • Remove the pan supports. • Remove the burner's caps and crowns. • With a socket spanner 7 unscrew and remove the injectors (Fig. 7), and replace them with the ones required for the type of gas in use (see table 2). •...
  • Page 11: Building In

    Building In This hob can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hob dimensions are shown in the relevant diagram. The edge of the cut out must have a minimum distance from the rear wall of 55 mm.
  • Page 12: Fitting The Hob To The Worktop

    Fitting the hob to the worktop The hobs can be installed in a kitchen unit with an opening for insertion whose dimensions are shown in Fig. 9. To install the hob, proceed as follows: Dimensions are given in millimeters 1) Remove the pan supports, the burners caps and crowns and turn the hob upside down, taking care the ignition candles are not damaged in this operation.
  • Page 13: Possibilities For Insertion

    Possibilities for insertion Kitchen unit with door Kitchen unit with oven Proper arrangements must be taken in designing the The hob recess dimensions must comply the indication furniture unit, in order to avoid any contact with the given in Figs. 13 and 14 and must be provided with bottom of the hob which can be heated when it is brackets to allow a continuous supply of air.
  • Page 14: Service And Original Spare Parts

    Service and original Spare Parts This appliance, before leaving the factory, has been Original spareparts, certified by the product tested and studied by many experts and specialists, in manufacturer and carrying this symbol are only available order to give you the best results. at our Service Centre and authorized spareparts shops.
  • Page 16 08/07...

Table of Contents