Design Information; Product Dimensions And Clearances; Using Duct Cover Accessories; Optional Accessories - GE MONOGRAM ZV950 Installation Instructions Manual

PRODUCT DIMENSIONS AND
CLEARANCES (cont.)

Using Duct Cover Accessories

A Duct Cover Accessory may be required for your
hood installation height. Use this chart to determine
installation height and accessory for your ceiling height.
ZV950SDSS Installation Heights
Actual
Ceiling
* Possible Hood
Height Installation Height
7' 11" 24-1/2"
8' 0" 25-1/2"
8' 1"
25-1/2" to 26-1/2"
8' 2" 25-1/2" to 27-1/2"
8' 3" 25-1/2" to 28-1/2"
8' 4" 25-1/2" to 29-1/2"
8' 5" 25-1/2" to 30"
8' 6"
25-1/2" to 30"
8' 7" 25-1/2" to 30"
8' 8"
25-1/2" to 30"
8' 9" 25-1/2" to 30"
8' 10" 25-1/2" to 30"
8' 11"
25-1/2" to 30"
9' 0" 25-1/2" to 30"
9' 1"
26-1/2" to 30"
9' 2" 26-1/2" to 30"
9' 3" 26-1/2" to 30"
9' 4"
26-1/2" to 30"
9' 5" 26-1/2" to 30"
9' 6"
30" min.
9' 7" 30" min.
9' 8" 30" min.
9' 9"
30" min.
9' 10" 30" min.
9' 11"
30" min.
10' 0"
30" min.
14' 0"
* Based on 36" countertop height.
The serial plate is located behind the removable filters.

Design Information

Duct Cover
4

OPTIONAL ACCESSORIES

ZX14SDSS, optional stainless steel duct cover
is available for ceiling heights greater than 10 ft.
and up to 14 ft.
Order the optional duct cover at the same time
as the vent hood and have on site before installation.
Note: Duct covers must be installed as shown in this
book. Do not "build-in" the duct cover. If service
is required, the duct cover must be removed to access
hood components.