Electrolux EWD 1409 I Instruction Booklet page 8

Reset/cancellation of the programme
If the programme selector dial is turned to Off position,
three blinking dashes are displayed.
Now you can select a new programme.
(If the programme selector dial has not been turned to
Off position at the end of the previous washing cycle,
when you press the ON/OFF
machine on, the display will show a blinking zero.)
Duration of the selected programme
After selecting a programme, the duration is displayed
in hours and minutes (for example 2 2 . . 0 0 5 5 ).
The duration is calculated automatically on the basis of
the maximum recommended load for each type of
fabric.
After the programme has started, the time remaining is
updated every minute.
Drying time
The selected drying time is displayed in minutes.
After starting the programme, the remaining time is
updated every minute.
button to switch the
Delayed start
The selected delay (23 hours max) set by means of the
relevant button appears on the display for 3 seconds,
then the duration of the previously selected programme
is displayed.
The countdown is updated every hour and, when remain
the last 2 hours, each 30 min.
Incorrect option selection
f an option which is not compatible with the set wash
I
programme is selected, the message Err is displayed for
2 seconds.
Alarm codes
In the event of operating problems, some alarm codes
can be displayed, for example E E 2 2 0 0 (see paragraph
"Something not working").
8