Lockout Time Setting
This sets the time period (minutes) for the system lockout when the permitted number of log-on attempts is
exceeded during the User Authentication. Wait for the Lockout Time period to lapse before you are permitted to
log on to User Authentication.
Note:
Before performing this setup, you first need to set "75 User Authentication" (see page 14).
Press the Function key.
Select "General Settings".
Select "09 Key Operator Mode".
22
Enter the Key Operator's password (8-digit),
and then select "OK".
Note:
The default password is "00000000".
To change the password, select "85 Key Operator
Password" in the General Settings (Key Operator
Mode), and then enter the new password.
Select "60 - 79" tab, and scroll the screen, and
then select "79 Lockout Time".
3
Select "Input", and enter the lockout time
(1 to 60 minutes), and then select "OK".
Press the Reset key to return to standby.