ID Timeout Setting
If the ID Timeout setting is set to "Auto Rst", authentication is cancelled if no operation is performed on the
machine for a specified time period after performing authentication. The ID Timeout period can be set in Auto
Reset Time Setting on page 20.
Note:
Before performing this setup, you first need to set "75 User Authentication" (see page 14).
Press the Function key.
Select "General Settings".
Select "09 Key Operator Mode".
18
Enter the Key Operator's password (8-digit),
and then select "OK".
Note:
The default password is "00000000".
To change the password, select "85 Key Operator
Password" in the General Settings (Key Operator
Mode), and then enter the new password.
Select "60 - 79" tab, and scroll the screen, and
then select "76 ID Timeout".
3