Problem Solver - GE 24 Use And Care Manual

Ge monogram use and care guide stainless steel professional outdoor cooking center 24, 27, 36, 48
Table of Contents

Advertisement

Questions?
PROBLEM
Use this
GRILL WON'T LIGHT • Check to see if other burners on the unit operate.
WHEN THE ROTARY
problem
IGNITER IS TURNED
solver!
BURNER FLAME IS
YELLOW OR ORANGE • Check the air shutter for proper adjustment.
IN CONJUNCTION
WITH THE ODOR
OF GAS
LOW HEAT WITH
CONTROL KNOB IN
THE HI POSITION
ROTISSERIE BURNER • Check for a spark at the igniter.
WON'T LIGHT
(on some models)
OPTIONAL
ROTISSERIE LIGHTS
BUT WILL NOT HOLD • Hold the safety valve button in until the burner remains lit.
FLAME ONCE
BUTTON IS RELEASED
(on some models)
THE GRILL BURNER
WILL NOT SIT LEVEL
INSIDE THE GRILL
BOX
The Problem Solver
POSSIBLE CAUSE
• Remove the grill rack and the stainless steel radiant tray, and watch
the igniter tip. You should see a spark jump from the tip of the igniter
when the knob is turned. If there is no spark check to ensure there is
gas supplied to the unit.
• Use a match to light the burner. (See the "To light the grill" section).
• Visually check the electrode and wire while turning the igniter.
The only place a spark should appear is at the electrode tip.
If the electrode or wire leaks voltage, remove and replace.
• Purge the gas line of any air.
• Check the orifice for blockage.
• Inspect the igniter tip to make sure it is clean and free from debris.
Clean the area. Readjust for 1/8 gap.
• Check the burner inlet for obstructions.
(See the "Installation Instructions").
• Placement of the cooking center is important for proper burner
operation. Do not place the cooking center in a dusty area.
• Inspect the fuel hose to ensure it is not bent or kinked.
• Adequate gas supply may not be available. Check to make sure there
is gas in the LP tank (on some models).
• If it is only one burner that appears low, the burner or burner orifice
may need cleaning.
• The air shutter may need adjustment.
• Preheat the grill for 15 minutes with the lid closed.
• Use a match to light the burner.
• Readjust the thermocouple so that it is not bent or kinked, but
lies flat against the burner.
• The burner may be upside down. Rotate the burner 180° and
reinstall. Make sure it is secure and level.
Stainless Steel Outdoor Cooking Center
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents