Template For Nameplate - GE Wine Chiller Wine Reserve and Beverage Center Design Manual

TEMPLATE FOR NAMEPLATE LOCATION
Upper Left
Corner of
Glass if Hinge
is on Left
To position nameplate:
• Cut template along dotted line.
• Hold or tape template behind
glass door so that it is visible from
the front side.
• Remove backing from nameplate.
• Place nameplate onto front side of
door, matching illustration on the
template.
IMPORTANT: Nameplate must
be placed on the opposite side of
the door handle.
Pub. No. 49-60210-4
Dwg. No. 197D5129P001
03-04 JR
Printed in Slovenia
Cut on Dotted Line
Top of Badge
Door Frame Side
Note: While performing installations described in this book,
safety glasses or goggles should be worn.
®
For Monogram local service in your area, call
1.800.444.1845.
Note: Product improvement is a continuing endeavor at
General Electric. Therefore, materials, appearance and
specifications are subject to change without notice.
Top of Glass Door
DOOR NAMEPLATE LOCATION
Upper Right
Corner of
Glass if Hinge
is on Right
Door Frame Side