Table Of Contents; Safety Information; Before You Begin - GE Wine Chiller Wine Reserve and Beverage Center Design Manual

BEFORE YOU BEGIN:

Read these instructions completely and carefully.
IMPORTANT -
for local inspector's use.
IMPORTANT -
codes and ordinances.
Note to Installer
- Be sure to leave these
instructions with the Consumer.
Note to Consumer
- Keep these instructions with
your Owner's Manual for future reference.
WARNING
properly grounded. See "Electrical Supply", page 4.
AVERTISSEMENT
Cet appareil doit être correctement mis à la terre.
Consulter <<Alimentation électrique>>, page 4.
If you received a damaged wine chiller, wine reserve
or beverage center, you should immediately contact
your dealer or builder.
Skill Level -
Installation requires basic mechanical
skills. Proper installation is the responsibility of the
installer. Product failure due to improper installation
is not covered under the GE Appliance Warranty.
CONTENTS
Design Guide
The Installation Space ............................ 3
Product Clearances ................................ 3
Side-by-Side Installation ........................ 3

Safety Information

Save these instructions
Observe all governing
-
This appliance must be
-
Installation Instructions
Tools, Hardware ....................................... 4
Grounding the Product ........................... 4
Staining Wood Drawer Fronts ............... 4
Step 1, Remove Packaging .................... 4
Step 2, Reverse Door Swing .................. 5
WARNINGS:
• Use this appliance only for its intended purpose.
• Immediately repair or replace electrical service
cords that become frayed or damaged.
• Unplug the unit before cleaning or making repairs.
• Repairs should be made by a qualified service
technician.
AVERTISSEMENT :
• Il ne faut utiliser cet appareil que pour l'usage
pour lequel il a été construit.
• Il faut réparer ou remplacer immédiatement tout
cordon d'alimentation électrique effiloché ou
endommagé.
• Débrancher le bar ou le réfrigérateur a vin avant
le nettoyage ou toute intervention.
• Les réparations doivent être faites par un
technicien qualifié.
For Monogram local service in your area, call
1.800.444.1845
For Monogram service in Canada, call
1.888.880.3030
For Monogram Parts and Accessories, call
1.800.626.2002.
www. monogram.com
Step 3, Leveling ........................................ 6
Step 4, Connect Power ........................... 6
Step 5, Slide Product into Cutout .......... 6
Step 6, Install Nameplate ....................... 6
Step 7, Set Temperature Controls ......... 6
Template for Nameplate ...... Back Cover
2