Instrument And Control Functions; Main Switch/Steering Lock - Yamaha BWS CW50 Owner's Manual

Main switch/steering lock

PUSH
ZAUM0253
The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.
ON " "
All electrical circuits are supplied with
power, and the engine can be started.
The key cannot be removed.
NOTE:
The headlight, meter lighting and tail-
light come on automatically when the
engine is started.

INSTRUMENT AND CONTROL FUNCTIONS

EAU10460
OFF " "
All electrical systems are off. The key
can be removed.
CHECK " "
The 2-stroke engine oil level warning
light should come on. (See page 3-2.)
LOCK " "
The steering is locked, and all electrical
systems are off. The key can be re-
moved.
To lock the steering
1. Turn the handlebars all the way to
EAU10640
the left.
2. Push the key in from the "
tion, and then turn it to " " while
still pushing it.
3. Remove the key.
To unlock the steering
Push the key in, and then turn it to "
while still pushing it.
EAU10660
Never turn the key to "
while the vehicle is moving, other-
wise the electrical systems will be
EAU10670
switched off, which may result in
loss of control or an accident. Make
sure that the vehicle is stopped be-
fore turning the key to "
EAU10680
" posi-
"
3-1
WARNING
" or " "
" or " ".
EWA10060
3