Instrument And Control Functions; Main Switch/Steering Lock - Yamaha LEXI Owner's Manual

Main switch/steering lock

(for GDS125-I)
The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
main switch positions are described
below.
TIP
The main switch/steering lock is
equipped with a keyhole shutter. (See
page 6-2 for keyhole shutter opening
and closing procedures.)
ON
All electrical circuits are supplied with
power, and the engine can be started.
The key cannot be removed.
EAUN0264
TIP
 The meter lighting, taillight, license
plate light and auxiliary light come
on automatically when the key is
turned to "ON".
 The fuel pump can be heard when
the key is turned to "ON".
OFF
All electrical systems are off. The key
can be removed.
WARNING
Never turn the key to "OFF" or
"LOCK" while the vehicle is moving.
Otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident.
LOCK
The steering is locked, and all electrical
systems are off. The key can be re-
moved.
EAU65810

Instrument and control functions

To lock the steering
1
EAU10662
1. Push.
2. Turn.
EWA10062
1. Turn the handlebars all the way to
2. Push the key in from the "OFF"
3. Remove the key.
TIP
If the steering will not lock, try turning
EAUU1043
the handlebars back to the right slight-
ly.
6-1
2
the left.
position, and then turn it to
"LOCK" while still pushing it.
6