Replacing A Front Turn Signal Light Bulb - Yamaha XCITY VP250 Owner's Manual

ZAUM0677
1. Headlight bulb cover
3. Disconnect the headlight coupler.
4. Unhook the headlight bulb holder,
and then remove the burnt out
bulb.
ZAUM0678
1. Headlight bulb
2. Headlight coupler
PERIODIC MAINTENANCE AND ADJUSTMENT
5. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
6. Connect the headlight coupler.
7. Install the headlight bulb cover.
1 8. Install the cowling.
9. Have a Yamaha dealer adjust the
headlight beam if necessary.
1
2
Replacing a front turn signal
light bulb
NOTICE
It is advisable to have a Yamaha
dealer perform this job.
1. Place the scooter on the center-
2. Remove cowling A. (See page
3. Remove the turn signal light bulb
ZAUM0465
1. Turn signal light bulb socket
4. Remove the burnt-out bulb by
6-27
stand.
6-7.)
socket (together with the bulb) by
turning it counterclockwise.
pushing it in and turning it counter-
clockwise.
EAUT1263
ECA10670
6
1