Checking The Brake Fluid Level - Yamaha XCITY VP250 Owner's Manual

Hide thumbs Also See for XCITY VP250:
Table of Contents

Advertisement

Checking the brake fluid level

Before riding, check that the brake fluid
is above the minimum level mark.
Check the brake fluid level with the top
of the reservoir level. Replenish the
brake fluid if necessary.
Front brake
ZAUM0665
1. Minimum level mark
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU22581
Rear brake
MIN
1
ZAUM0666
1. Minimum level mark
MIN
1
Specified brake fluid:
DOT 4
WARNING
Improper maintenance can result in
loss of braking ability. Observe
these precautions:
Insufficient brake fluid may al-
low air to enter the brake sys-
tem,
performance.
Clean the filler cap before re-
moving. Use only DOT 4 brake
fluid from a sealed container.
EWA15990
reducing
braking
6-19
Use only the specified brake flu-
id; otherwise, the rubber seals
may deteriorate, causing leak-
age.
Refill with the same type of
brake fluid. Adding a brake fluid
other than DOT 4 may result in a
harmful chemical reaction.
Be careful that water does not
enter the brake fluid reservoir
when refilling. Water will signifi-
cantly lower the boiling point of
the fluid and may result in vapor
lock.
NOTICE
Brake fluid may damage painted sur-
faces or plastic parts. Always clean
up spilled fluid immediately.
As the brake pads wear, it is normal for
the brake fluid level to gradually go
down. A low brake fluid level may indi-
cate worn brake pads and/or brake sys-
tem leakage; therefore, be sure to
check the brake pads for wear and the
brake system for leakage. If the brake
ECA17640
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents