Overlay Data - Lowrance Elite-4m HD Operation Manual

Overlay Data

Used to select data shown on the Chart page.
Overlay
data
Show
Enables/disables the display of
overlay data, allowing you to
remove overlay data from the
screen without deleting the current overlay data
configuration.
Configure
Allows you to select/customize overlay data.
Pages | Elite-4m HD
To add overlay data:
1. From the Chart page, press Menu.
2. Select Overlay data and press enter.
3. Select Configure and press enter.
4. Press Menu and select Add. Press
enter.
5. Select a data category and press
enter.
6. Select the desired data and press
enter.
7. Repeat Steps 5 and 6 to add more data.
8. Press Menu and select Return to
Overlays. Press enter.
9. Press Menu, select Done Configuring
and press enter.
10