Error Messages - Casio Aculaser M2 User Manual

Error Messages

One of the error messages below appears on the display when a problem occurs.
• Press the dr (EXIT) button to clear an error message.
Display Message
1. The USB flash drive is not connected to the
Digital Piano's USB flash drive port.
2. The USB flash drive was removed while some
operation was in progress.
No Media
3. The USB flash drive is write-protected.
4. The USB flash drive has anti-virus software.
There is no loadable or playable file in the
No File
"MUSICDAT" folder.
You are attempting to save data to a USB flash drive
No Data
when there is no data to save.
A read-only file with the same name you are trying
to use is already stored on USB flash drive.
Read Only
There is not enough space available on the USB flash
Media Full drive.
1. There are too many files on the USB flash drive.
Too Many Files
2. There is a file named TAKE99.WAV in the
"MUSICDAT" folder.
You are attempting to play back song data that is not
Not SMF01
SMF Format 0 or Format 1.
1. The data on the USB flash drive is too big to play. 1 and 2. This Digital Piano supports playback of
2. The SMF file size exceeded 320KB during SMF
save.
3. The phrase data you are trying to load is too
large to be imported into Digital Piano memory.
Size Over
• The maximum allowable size of a phrase file
for import is approximately 8KB.
• The maximum allowable total size of phrase
files that can be imported is approximately
1MB (up to 1,000 files).
1. The USB flash drive data is corrupted.
Wrong Data
2. USB flash drive contains data that is not
supported by this Digital Piano.
There is not enough Digital Piano memory available
Memory Full to convert a song sequencer song to SMF data and
store it on the USB flash drive.
1. The USB flash drive format is not compatible
with this Digital Piano.
Format Error
2. The USB flash drive is corrupted.
Media Error The USB flash drive is corrupted.
You are attempting to rename a USB flash drive file
Filename Error with a file name that is already used by another file
on the USB flash drive.
Cause Action
1. Correctly plug the USB flash drive into the USB
flash drive port.
2. Do not remove the USB flash drive while any
operation is in progress.
3. Unprotect the USB flash drive.
4. Use a USB flash drive that does not have anti-
virus software.
Move the file you want to load into the appropriate
location (pages E-30, 32) in the "MUSICDAT" folder.
Record something before performing a save
operation.
• Change the name and then save the new data.
• Remove the read-only attribute from the existing
USB flash drive file and overwrite it with the new
data.
• Use a different USB flash drive.
Delete some of the files on the USB flash drive to
make room for new data (page E-33) or use a
different USB flash drive.
1. Delete some of the files on the USB flash drive to
make room for new data.
2. Delete the WAV file in the "MUSICDAT" folder.
This Digital Piano supports playback of SMF Format
0 or Format 1 only.
song data files with a maximum size of
320KB.
3. Delete some of the data currently in Digital Piano
memory to free up available space.
—
Reduce the size of the song data.
Example:
Delete any tracks that are not required.
1. Format the USB flash drive on the Digital Piano.
2. Use a different USB flash drive.
Use a different USB flash drive.
Rename to a different file name.
USB Flash Drive
E-35