Deleting Data - Casio Aculaser M2 User Manual

Other Useful Functions

Deleting Data

Use the procedure below to delete specific edited or
recorded data (tones, arpeggios, phrases, songs, stage
setups) from Digital Piano memory.
1.
bm
Press the (SYS SETTING) button.
2.
Use the dt (w) and
"Initialize".
3.
ds
Use the (u),
(i) buttons to select the type of data you
want to delete.
• To delete one stage setup: Init Stage Set
• To delete one user tone: Init Tone
• To delete one user arpeggio: Clear Arpeggio
• To delete one recorded phrase: Clear Phrase
• To delete one recorded song: Clear Song Seq
• To delete all data: Initialize All
4.
Select the number of the data you want to
delete.
• For details about how to do this, see "Changing a
Number or a Value" in "Operations Common to All
Modes" (page E-9).
• If you selected "Initialize All" in step 3 of the above
procedure, you do not need to select a data number
here.
5.
Press the em (ENTER) button.
This will display a confirmation message "SURE?".
• If you want to cancel the delete operation, press the
eo (NO) or dr (EXIT) button.
6.
eo
Press the (YES) button.
The message "Please Wait" will remain on the display
while the operation is being performed. Do not perform
any operation while this message is on the display.
"Complete" appears on the display after data delete is
complete.
For information about other setting items that
appear on the display when the
button is pressed, see the separate "Tutorial".
E-28
ek (q) buttons to select
dt ek
(w), (q), and
bm
(SYS SETTING)
el