Problem Solving - Epson SF-710 User Manual

SF-710/510/310 User's Guide

Problem Solving

Check each item.
Basic actions
Troubleshooting
Problem
The screen is not displayed.
The device does not react
even after performing an
operation.
The screen turns off or turns
blue during use
The clock turns off.
The time is not set correctly.
Measurement stops while
exercising.
You cannot start using the device immediately
after purchase until the device is charged. Also,
nothing is displayed if the battery runs out. Charge
the device.
"Charging" on page 22
U
Is the battery running low? Charge the battery.
"About the Battery" on page 27
U
If the device does not operate after charging, try
resetting the system.
"Resetting the System" on page 118
U
Perform a system reset.
"Resetting the System" on page 118
U
When you leave the device for a while, it enters
sleep status and the time display turns off. This is
not a malfunction as the display is restored the
next time you move the device. If the display is not
restored, the battery is running low. Charge the
device.
"Charging" on page 22
U
Also, if Auto Sleep is set to off, the clock does not
turn off.
"Sys. Settings" on page 93
U
Set "Time Adjust" from Sys. Settings.
"Sys. Settings" on page 93
U
If the hour is different, check the time zone and
daylight-saving time.
"Sys. Settings" on page 93
U
When exercising slowly, such as when walking, we
recommend turning off the AT Pause function.
"Automatically Start/Stop Measuring (AT
U
Pause Function)" on page 57
115
Solution