Connecting Two Vcrs For Copying Tapes - GE VG4256 User Manual

Hooking Up the VCR

Connecting Two VCRs for Copying Tapes

Option A hookup.
Use this hookup for a simple connection
which requires fewer accessories.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Set the 3CH.4 switch on the playback
VCR to either channel 3 or 4.
Tune the recording VCR to this channel to
receive the signal from the playback VCR.
3. Connect as shown.
This connection may require additional
accessories not provided.
4. Plug in power cords of VCRs and TV.
Continue to page 8.
5.
Option B hookup.
Use this hookup for slightly improved copy
quality, Hi-Fi, stereo playback and more
convenient operation Ñ use of the TV•VCR
button is not required.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Connect as shown.
This connection requires additional
accessories not provided. A Y-adapter
may be required to hear sound from both
channels if your other VCR is not stereo.
3. Plug in power cords of VCRs and TV.
Continue to page 8.
4.
Select the line (audio/video) input on the
recording VCR to receive the signal from
the playback VCR.
Caution: The unauthorized recording of
television programs and other materials
may infringe the rights of others.
6
A
Playback VCR
From Antenna, Cable
or Cable Box
Recording VCR
Audio/Video
Cables
B
Playback VCR (only)
R
AUDIO1
L
OUT
VIDEO1
Recording VCR
R
AUDIO1
L
VIDEO1
Audio/Video
Cables
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
R
IN FROM
AUDIO1
L
VHF/UHF
OUT TO TV
OUT IN
3 CH. 4
VIDEO1
RF Coaxial Cable
(supplied)
R
IN FROM
AUDIO1
L
VHF/UHF
OUT TO TV
OUT IN
3 CH. 4
VIDEO1
RF Coaxial
Cable
or
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
IN FROM
ANT.
VHF/UHF
OUT TO TV
IN
3 CH. 4
Audio/Video
Cables
IN FROM
ANT.
VHF/UHF
OUT TO TV
OUT IN
3 CH. 4
RF Coaxial Cable
or
(supplied)
ANT.
ANT.
From Antenna, Cable
or Cable Box