Table of Contents
Advertisement
Recording a Program
One Touch Recording
One touch recording lets you record up to four hours without using the timer program feature. The VCR
turns off automatically at the end of the recording.
1. Turn on the VCR.
2. Insert a tape with its safety tab in place.
3. Select the channel you want to record.
4. Use SPEED on the remote to select a recording speed.
5. Press REC on the remote or RECORD on the VCR to activate recording.
6. Press RECORD or REC repeatedly until the amount of recording time for
Stopping a One Touch Recording in Progress
You can stop a recording by:
¥ Pressing and holding the STOP button on the remote or STOP•EJECT on
¥ Pressing the RECORD button until 0:00 is displayed for the recording.
POWER
STOP•EJECT
CHANNEL
TV•VCR
TRACKING
the program is displayed on the TV screen.
Each press of RECORD or REC increases the time Ñ 30 minutes up to 4
hours.
REC
CH 06
RECORD LENGTH 0:00
PRESS REC TO SET LENGTH
Display on TV Screen
The REC and TIMER indicators light in the VCRÕs display panel.
During recording, press RECORD on the VCR or REC on the remote to
display the time remaining on the TV screen. Press RECORD or REC again
to increase the recording time.
the VCR for approximately three seconds.
RECORD
REW
RECORD
Press
Recording
RECORD
Time
(
0:30
30 Min)
1:00
(1 Hr)
1:30
(1 Hr, 30 Min)
2:00
(2 Hrs)
3:00
(3 Hrs)
4:00
(4 Hrs)
Normal Record
PLAY•PAUSE
FWD
21
Advertisement
Table of Contents
