Installation Instructions; Before You Start - GE GCG1520 Owner's Manual And Installation

Installation Instructions.

Cutout dimensions
Grounded electrical
outlet must be 3
(7.6 cm) min. from
either side wall.
18 min.
24 min.
(45.7 cm)
(61 cm)
15-1/4 min.
(38.4 cm)
10

Before you start...

Proper installation is your responsibility. Make
sure you have everything necessary for correct
installation. It is the personal responsibility and
obligation of the customer to contact a qualified
installer to assure that electrical installation meets
national and all local codes and ordinances.
Grounded electrical outlet is required.
Check the location where your compactor will be
installed. The cabinet opening should be square.
You should be able to fully open the compactor
drawer. Six inches (15.2cm) of clearance is
needed on the right side of compactor drawer to
be able to remove the compactor bag. Allow 23
inches (58.4 cm) in front of the compactor to
remove drawer.
Product dimensions—
look of your compactor may vary.
34-1/8 min.
(86.7 cm)
34-1/4 min.
(87 cm)
Tools and Materials Needed for Installation
Level
Phillips screwdriver
Flat-blade screwdriver
Parts Supplied for Undercounter Installation—
2 mounting clips
Do not let any item fall or collect behind
the compactor.
Failure to follow this instruction could
result in a fire.
Clearance dimensions
The overall
14-15/16 min.
24 min.
(38 cm)
(61 cm)
Pliers
Utility knife
Scissors
Remove parts from literature package.
2 mounting screws
#8 - 18 x 1/2
WARNING
Fire Hazard
6 (15.2 cm)
Clearance to
23 (58.4 cm)
the nearest
Clearance in front
vertical wall
of the compactor is
on the right
needed to fully open
side of the
or remove the
compactor is
compactor door.
needed to
remove bag.
Measuring tape
5/16 box-end wrench
Gloves