Table of Contents
Advertisement
Installer settings screen
The Installer settings screen is a hidden screen designed for installer use only. Do not change any settings in
this screen unless you are a qualified service technician. Changing these settings will affect the operation of the
heating/cooling system.
To enter this screen, go to the
three seconds until the Installer settings screen (Figure 13) appears.
The Installer settings screen displays the current internal settings of the thermostat. You can view and change
the settings from this screen. Scroll to the desired function and press Plus (+) or Minus (-) to change the value.
Figure 13. Installer settings screen
Screen navigation buttons include:
Done. Return to the
Plus. Increase value by 1 or change from N to Y.
Minus. Decrease value by 1 or change from Y to N.
Select. Select menu item to go to a submenu.
Up. Move selection pointer up.
Down. Move selection pointer down.
Main menu screen
Display Lock
Service Mode
Network Settings
MaxHeat SP
Done
Done
Main menu screen
on page 7.
on page 7 and press and hold the two inner control buttons for
Installer Settings
N
109
+
-
Select
Plus
Minus
Select
Up
Down
17
Advertisement
Table of Contents
