Setting The Dvg-5112S Through Ivr; Ivr (Interactive Voice Response) - D-Link DVG-5112S User Manual

Voip gateway

Hide thumbs Also See for DVG-5112S:

Table of Contents

DVG-5112S User's Manual

4. Setting the DVG-5112S through IVR

VoIP transmits voice data (packet) via the Internet to achieve telecommunications. This means that the

telecommunication quality is closely related to the whole network environment. If any one of the

telecommunicating parties has insufficient bandwidth or frequent packet loss, the telecommunication quality

will be poor. Therefore, an excellent telecommunication can only be created when DVG-5112S is connected

to the Internet and when network environment is stable.

Preparation

Install the DVG-5112S according to instructions. Connect the power supply, telephone set, telephone

cable, and network cable properly as described in Chapter 2.

If a static IP is used, confirm the desired IP settings of the WAN Port (IP address, Subnet Mask, and

Default gateway). Please contact your local Internet Service Provider (ISP) if you have any questions.

If using dialup ADSL (PPPoE) for network connection, confirm the dialup account number and

password.

If users wish to build DVG-5112S under the NAT, DVG-5112S WAN Port IP address and LAN Port

should not use the same range. This is to avoid network failures.

DVG-5112S provides convenient IVR functions. Users only need to pick up a handset and enter the function

code for the query and setting without using a PC.

Note: After finishing the settings, make sure the new settings are saved. This is so that the new settings

will take effect after DVG-5112S is restarted.

D-Link Systems, Inc.

Table of Contents