Table of Contents
Advertisement
DVG-5112S User's Manual
Other Settings
DVG-5112S provides advanced settings to apply to various situations. Here are Digit Map, DTMF & Pulse,
CPT/Cadence Settings and Provision Settings.
Digit Map
Digit Map now is combined the original feature of Digit Map and Speed Dial. You can use "?" or "%" in the
column of Scan Code, VoIP Dial-out and PSTN Dial-out. "?" is a single digit, and "%" is wildcard. It provides
a mapping between the number received from user and the replaced or modified number for real dial out.
With this function, user can easily add certain leading digits to replace full number. There are 50 sets of
leading digit entries to choose voice routing interface.
DVG-5112S
Digit Map Table
Item
Enable Pound Key '#' Function
Default Call Route
Enable
Scan Code
VoIP Dial-out
User Dial Length
Route
D-Link Systems, Inc.
Description
It is to speed up the connection of a call by entering ' # ' after a
complete phone number is dialed.
Define the default call route of DVG-5112S. If Default Call Route is
Deny, all numbers that are not match the Digit Map Table will be
denied.
Tick the check box to make this entry effective.
Define the leading digits for DVG-5112S to scan while the user is
dialing.
Define the dialed number rule for DVG-5112S calling through
Internet.
Define total number of digits that user dialed. A setting of zero tells
the gateway scans digits only and disregards the total digit count.
Determine the interface calls should go through if above conditions
satisfied.
46
Advertisement
Table of Contents
