Honeywell Chronotherm III Owner's Manual page 9

To determine which type of recovery is set into your
thermostat, make sure thermostat is powered with fresh
batteries, or is mounted and powered on the wall (see
page 16).
Press EN PROGRAMME key. Check thermostat dis-
play.
• If the shows in the lower right-hand corner (see il-
lustration), the thermostat is set for conventional re-
covery. If you would rather have Programmed Recov-
ery, remove thermostat from wallplate, turn screw 3A
(on back of thermostat) clockwise
toms. Do not overtighten.
• If the does not show, the thermostat is set for Pro-
grammed Recovery. If you would rather have conven-
tional recovery, remove thermostat from wallplate, turn
screw 3A (on back of thermostat) counterclockwise
1/2 of 1 turn.
until it bot-
5
TUE WED THU FRI
INDICATES
THERMOSTAT IS SET FOR
CONVENTIONAL RECOVERY
M9576
69-0865