Erasing Configuration - GE MultiLink ML1600 Instruction Manual

SYSTEM CONFIGURATION
5.4.8

Erasing Configuration

Note
5–26
To delete or edit the entries, use the delete or edit icons next to each entry shown above.
Kill Config option using SWM
To erase the configuration and reset the configurations to factory defaults, you can use
the kill config option from Administration tab by selecting kill config.
User also has the option to save one module from defaulting back to factory defaults by
checking the module box before issuing kill Config command.
MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
CHAPTER 5: IP ADDRESSING