Lacp Commands - GE 82-POE User Manual

Chapter 6: Command Line Interface
trunk add
Description:
Add a new trunk group.
Syntax:
trunk add <trunk-id> <lacp | no-lacp> <port-list> <active-port-list>
Parameters:
<trunk-id> specifies the trunk group to be added.
lacp
Description:
Specifies the added trunk group to be LACP enabled.
Syntax:
lacp
no-lacp specifies the added trunk group to be LACP disabled.
Parameters:
<port-list> specifies the ports to be set.
<active-port-list> specifies the ports to be set to LACP active.
no trunk
Description:
Delete an existing trunk group.
Syntax:
no trunk <trunk-id>
Parameters:
<trunk-id> specifies the trunk group to be deleted

LACP Commands

[no] lacp
Description:
Enable/disable LACP.
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 153