Table of Contents
Advertisement
setup screen
-
Two or more objects overlap or one object divides in multiple portions.
-
Too fast object (for a proper detection, one object should be found overlapping between
contiguous frames).
-
Reflection / blur / shadow due to a strong light such as direct sunlight, illumination, or
headlamp.
-
In severe snow, rain, wind or in dawn / dusk.
-
A moving object comes close to the camera.
To use the IV analysis function according to the virtual line based rule
1.
Set <IV analysis function> to
<Enable>.
2.
Set the event rule to <Virtual line
based rules>.
3.
Click a desired point in the video and
drag it to the end point. Then, the
popup window appears.
4.
Select a desired <Virtual Line Based
Rules>.
You can specify up to 3 event rules for the virtual line.
•
Right : A movement from left to right in the virtual line will be detected.
•
Left : A movement from right to left in the virtual line will be detected.
•
Both : A movement in any direction in the virtual line will be detected.
5.
Click [OK].
To cancel the existing line, right-click on the line and select [Delete] in the context
menu.
6.
When done, click [Apply (
To use the IV analysis function according to the defined area based rule
1.
Set <IV analysis function> to
<Enable>.
2.
Set the event rule to <Defined area
based rules>.
3.
Click a corner point of a desired area in
the video to display the popup window.
88_ setup screen
)].
Advertisement
Table of Contents
