Table of Contents
Advertisement
INSTALLATION
Preparing Adapter and Cable
Plug the power adapter into a power outlet.
Check out the rated voltage and current before making connections.
Rated Power
AC 24V
J
SNP-5200 : If hPoE and AC 24V are both applied, this camera will get supplied with power from
hPoE.
SNP-5200H
-
If hPoE and AC 24V are both applied in heater operation mode, the heater will be powered by
AC 24V and the other devices will get supplied with power from hPoE.
-
If hPoE and AC 24V are both applied with heater turned off, this camera will get supplied with
power from hPoE.
Electrical Resistance of Copper Wire at [20°C (68°F)]
Copper Wire Gauge (AWG)
Resistance (Ω/m)
Drop Voltage (V/m)
As shown in the table above, you may encounter a voltage-sag depending on the wire length.
If you use an excessively long wire for camera connection, the camera may not work properly.
-
Camera Operating Voltage: AC 24V±10%
-
Voltage drop measurements on the chart above may vary depending on the type and manufacture of
the copper cable.
Allowable Input Voltage
AC 22V ~ 26V
#24(0.22mm
) #22(0.33mm
2
0.078
0.050
0.028
0.018
Current Consumption
2.5 A
) #20(0.52mm
) #18(0.83mm
2
2
0.030
0.011
English _29
)
2
0.018
0.06
Advertisement
Table of Contents
