Table of Contents
Advertisement
Figure 4: RJ-45 connection diagram
2.
Enable the Hyper Terminal program. A terminal program is required to
make the software connection to the Managed Switch. Windows' Hyper
Terminal program is a good choice. Hyper Terminal can be accessed
from the Start menu. Click START, then Programs, Accessories and then
Hyper Terminal.
3.
The following screen will appear. Input a new connection name. You
should use something like the model name of your switch.
Figure 5: New Connection dialog window
P/N 1069668 • REV 1.0 • ISS 22FEB10
5 of 10
Advertisement
Table of Contents
