GE JKP86SH Dimension Manual

GE Appliances
6015 Built-In MW/Double Ovens
(Pub. 1-G003 pg 105B) May 12, 1993
Built-In Microwave/Double Ovens
JKP86SH – GE 27" Built-In Double Microwave/Thermal Oven
Dimensions (in inches)
Dimensions (in inches)
10
Recommended
junction box
locations.
Locate junction
box either 5" MIN.
below cutout
floor or 48" MIN.
above cutout
floor
D
Minimum
E
cutout location
from floor
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F
temperature rating.
Note: If marks, blemishes or the cutout opening is visible above the installed oven, it may be
necessary to add wood shims under the runners and front trim until the marks or openings
are covered.
Electric wall ovens are not approved for installation with a plug and receptacle.
They must be hard wired in accordance with installation instructions.
Specification Revised 5/04
320358
A
Allow 3/4" for overlap
of oven over all
edges of cutout
C
2" X 4" or
equiv. runners
B
H
G
Conduit
(49" long)
F
Allow minimum of
21" for clearance
to adjacent corners,
drawers, walls, etc.
C L
Suitable
bracing
to support
18"
runners
Over centerline
of cabinet
(Must support 275 lbs.)
Cabinet
A – Cabinet Width Required
B – Minimum Cabinet Depth
21
C – Opening Width
D – Opening Height
E – Minimum Cutout Location from Floor
Oven
F – Overall Depth
G – Overall Height
H – Overall Width
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec
of at least a 194°F temperature rating.
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
For answers to your Monogram,
GE
Listed by
Underwriters
GEAppliances.com or call GE Answer Center
Laboratories
R
service, 800.626.2000.
2" x 4" or
equivalent
runners
27"
27" min.
23-5/8"
25" min.-25"-1/4 max.
41-1/4" max.
22"
23-5/8"
w/o trim 41-1/8"
with trim 42-1/8"
26-5/8"
GE Profile
®
appliance questions, visit our website at
®
KW Rating
240V 6.4
5.1
208V
Breaker Size
240V 30 Amps
208V 30 Amps
or
™
®