Advanced Wireless Settings - NETGEAR R6200 User Manual

Advanced Wireless Settings

To go to the Advanced Wireless Settings screen:

Select Advanced > Advanced Setup > Wireless Settings:
The following settings are available in this screen:
Enable Wireless Router Radio. You can completely turn off the wireless portion of the
wireless router by clearing this check box. Select this check box again to enable the wireless
portion of the router. When the wireless radio is disabled, other members of your household
can use the router by connecting their computers to the router with an Ethernet cable.
Note:
The Fragmentation Length, CTS/RTS Threshold, and Preamble
Mode options are reserved for wireless testing and advanced
configuration only. Do not change these settings.
Turn off wireless signal by schedule. You can use this feature to turn off the wireless signal
from your router at times when you do not need a wireless connection. For instance, you
could turn it off for the weekend if you leave town.
WPS Settings.You can add WPS devices to your network.
• Enable Router's PIN.
• Keep Existing Wireless Settings (2.4 GHz b/g/n).
• Keep Existing Wireless Settings (5 GHz a/n/ac).
AP Mode or Bridge. You can set up the R6200 in Bridge mode. See
on page 84.
Bridge Mode
Dual Band 11ac WiFi Router R6200
Advanced Settings
83
Scroll to
view
more
settings
Set Up the Router in