Checking The Oil Level Of The Drive Chain Housing - Yamaha RX10J Owner's Manual

8. Install the V-belt over the primary sheave assembly.
9. Rotate the secondary sliding sheave clockwise 6
and push 7 it so that it separates from the secondary
fixed sheave.
10. Install the V-belt 8 between the secondary sliding
and secondary fixed sheaves.
11. Install the drive guard.
WARNING
@
Never run the engine with the V-belt or drive guard
removed.
@
ESU00351
Checking the oil level of the drive chain hous-
ing
WARNING
@
The engine, oil tank, brake disc, and coolant hoses
will be very hot after the engine has been run. Avoid
contact while they are still hot with any part of your
body or clothing during inspection or repair.
@
1. Place the snowmobile on a level surface.
2. Remove the dipstick 1 and wipe it off with a clean
rag. Then put the dipstick in the hole.
8-17