Subnet Mask - Panasonic WJ-HD309 Operating Instructions Manual

● Data Bit
Select a data length for communication from the following.
7/8 bit
● Parity
Select a method to check a transmission error at communi-
cation from the following.
NONE: No parity check
EVEN: Even parity
ODD: Odd parity
● Stop Bit
Select a stop bit from the following.
1/2 bit
● Retry Timing
Select a retransmission interval for when data reception is
not confirmed from the following.
OFF/100 ms/200 ms/400 ms/1 000 ms
t
[NW Setup 1] Basic network settings
Perform the following basic network settings to operate
this unit using a PC via a network such as a LAN.
SETUP MENU
Camera Control
PS.Data Setup
RS485 Setup
RS232C Setup
NW Setup 1
NW Setup 2
NTP Setup
● HTTP Port Number
Specify the HTTP port number to be used to transfer
images from this unit. It is not necessary to change it for
normal use.
● User Authentication
Select ON and OFF whether or not to activate user authenti-
cation at the time of access from a PC to this unit.
When ON is selected, the user authentication (login) win-
dow will be displayed at the time of access from a PC.
The top page will be displayed if the entered user name
and password are registered.
ON: Activates user authentication.
OFF: Does not function.
Note: It is recommended to select ON for the user authenti-
cation for security.
118
Maintenance Recording Event Schedule
LIVE
Switcher Display Comm System
■
HTTP Port Number
00080
■
User Authentication OFF
■
Host Authentication OFF
■
Line Speed AUTO
■
Live Video Quality FQB
● Host Authentication
Select ON or OFF whether or not to restrict access by IP
addresses at the time of access from a PC to this unit.
When ON is selected, only PCs with registered IP address
can access this unit
Using the user and host authentication together will
enhance the network security.
ON: Activates host authentication.
OFF: Does not function.
● Line Speed
The line speed will be displayed.
It is impossible to change the value for this setting.
● Live Video Quality
Image quality level for a live (FQB: high quality) will be dis-
played.
It is impossible to change the value for this setting.
y
[NW Setup 2] Network connection settings
Perform the following network connection settings to
operate this unit using a PC via a network such as a
LAN.
SETUP MENU
Maintenance Recording
Switcher Display
■
DHCP
Camera Control
■
IP Address
PS.Data Setup
■

Subnet Mask

RS485 Setup ■
Gateway
■
RS232C Setup DNS
Primary
NW Setup 1
Secondary
NW Setup 2
■
DDNS
NTP Setup User Name
User Password
Access Interval
■
Host Name
HD316
■
Domain Name
localdomain
● DHCP
Select ON or OFF whether or not to use the DHCP server.
When obtaining IP addresses, net mask and a gateway
address from the DHCP server, set to ON.
If not, set to OFF and enter those addresses manually.
ON: Uses the DHCP server.
OFF: Does not use the DHCP server.
● IP Address
Enter an IP address when OFF is selected for "DHCP".
For this unit, enter 4 units of the decimal number (0-254).
● Subnet Mask
Enter a subnet mask according to the network configuration
when OFF is selected for "DHCP".
● Gateway
Enter the gateway address according to the network con-
figuration when OFF is selected for "DHCP".
Event Schedule
LIVE
Comm System
OFF
192 168 000 250
. . .
255 . 255 . 255 . 000
192 . 168 . 000 . 001
MANUAL
000 000 000 000
. . .
000 000 000 000
. . .
OFF
10m