Brother ADS-1000W Quick Setup Manual page 22

Product Safety Guide
The product should be placed so as not to come into contact with any wall or other device. Otherwise,
it could create a risk of overheating and/or fire.
Instead:
• Place the unit on a solid surface, never on a bed, sofa, rug, or other similar soft surface.
• Do not place the unit in a "built-in" installation unless adequate ventilation is provided.
CAUTION
Avoid placing the unit in a high-traffic area. If you must place it in a high-traffic area, ensure that the unit is in
a safe location where it cannot be accidentally knocked-over, which could cause injury to you and serious
damage to the unit.
Ensure that cables and cords leading to the unit are secured so as not to pose a tripping hazard.
DO NOT place the unit on an unstable or tilted cart, stand, table or on any tilted/slanted surface. The machine
is heavy and may fall, causing injury to you and serious damage to the unit.
Make sure that no part of the unit protrudes from the desk or stand where the unit is located. Make sure that
the unit is located on a flat, level, and stable surface free from vibration. Failure to observe these precautions
could cause the unit to fall, causing injury to you and serious damage to the unit.
IMPORTANT
• DO NOT place your machine next to sources of interference, such as speakers or the base units of
non-Brother cordless telephones. Doing so may interfere with the operation of the machine's electronic
components.
• DO NOT connect the unit to an AC power outlet controlled by wall switches or automatic timers. Disruption
of power can delete information from the machine's memory, and repeated cycling of the power can
damage the unit.
22