Table of Contents
Advertisement
Customising the AV Source Setting
% Touch [Mute Input/Guide] in Initial
menu.
Each touch of [Mute Input/Guide] changes
the settings as follows:
! Mute — Muting
! ATT — Attenuation
! Normal — Volume does not change
p Operation returns to normal when the
phone connection (the mute signal on the
yellow/black lead) is ended or when the na-
vigation guidance is ended.
p Even when you receive a phone call, naviga-
tion voice guidance cannot be attenuated
or muted. Use [Volume] to control the navi-
gation voice guidance volume.
Other Functions
Selecting the video for "Rear
display"
You can choose either to show the same
image as the front screen or to show the se-
lected source on the "Rear display".
p The navigation system automatically
switches the colour system (NTSC/PAL) for
each video and outputs the video on the
"Rear Display". To correctly output each
type of video on the "Rear Display", we re-
commend using a "Rear Display" with a
function to automatically switch the colour
system (e.g. AVD-W7900).
1
Press AV button to switch AV operation
screen.
2
Press MENU button and then touch
[REAR SCREEN].
Each touch of [REAR SCREEN] changes the
settings as follows:
! Mirror — The video on the front screen of
the navigation unit is output to the "Rear
display"
! DVD — The video and sound of the DVDs
are output to the "Rear display"
! AV1 — The video and sound of AV-1 are
output to the "Rear display"
! AV2 — The video and sound of AV-2 are
output to the "Rear display"
p When [Mirror] is selected, the following re-
strictions are applied to "Rear display".
— When selecting [Rear View] in the map
display, nothing is displayed.
— All sounds cannot be output for "Rear
display".
— The map screen navigation images out-
put to the "Rear display" differ from
standard NTSC format images. There-
fore, their quality will be inferior to the
images that appear on the front screen.
p When [DVD] is selected, the following re-
strictions are applied to "Rear display".
— When a CD or MP3/WMA/AAC disc is
set in the built-in DVD drive, nothing is
output.
p When [AV1] or [AV2] is selected, the follow-
ing restrictions are applied to "Rear dis-
play".
— The "Video image" and sound are output
only when AV-1/AV-2 has both video
and sound.
— The "Video image" and sound are output
only when the appropriate setting on
[AV1 Input] or [AV2 Input].
Setup adjustments
1 System menu display
= Refer to step 3 in How to Display each
Menu on page 76.
Setting the video input
You can switch the setting according to the
connected component.
1
Engb
Chapter
09
125
Advertisement
Table of Contents
