Adjusting The Dimmer; Protecting Your Unit From Theft; Removing The Front Panel; Attaching The Front Panel - Pioneer AVIC-X1 Hardware Manual

MAN-AVIC-X1-EN HW.book Page 17 Friday, January 16, 2004 11:41 AM
3
Touch "ESC" to hide the touch panel
keys.

Adjusting the dimmer

The DIMMER adjustments for daytime, evening,
and nighttime ambient light are stored
separately. The brightness of the LCD screen
adjusts automatically to the optimum level in
accordance with the ambient light based on the
set values.
1
Press WIDE button and hold to display
PICTURE ADJUST.
The ambient light level icon used as the
standard for adjusting DIMMER appears
above the level bar.
The icons indicating the current ambient
brightness used for adjusting BRIGHT
and CONTRAST may differ from
DIMMER slightly.
• Yellow sun – bright ambient light
(daytime)
• Red sun – intermediate brightness
(evening)
• Blue moon – dark ambient light
(nighttime)
2
Touch 2 or 3 to adjust the brightness.
The level indicates the brightness of the
screen being adjusted. The further the level
indicator moves to the right, the brighter the
screen.
3
Touch "ESC" to hide the touch panel
keys.
Because of the LCD screen
characteristics, you may not be able to
adjust the screen at low temperatures.

Protecting your unit from theft

The front panel can be detached from the display
unit to discourage theft, as described below.
Important:
• Never use force or grip the display and the
buttons tightly when removing or attaching.
• Avoid subjecting the front panel to excessive
shocks.
• Keep the front panel out of direct sunlight and
high temperatures.
• After detached the front panel, keep it in the
safe place not to result in scratching or
damage.

Removing the front panel

1
Press DETACH button to remove the front
panel.
2
Gently grip the right side of the front
panel and slowly pull it outward.
Take care not to drop the front panel and
protect it from contact with water or other
fluids to prevent permanent damage.

Attaching the front panel

• Replace the front panel by holding it
upright to this unit and clipping it
securely into the mounting hooks.
17