GE RANGES JSP26 Owner's Manual page 21

How to Delay the Start of Cleaning
Make sure the clock shows the correct
time of day.
[]
Press the SELFCLEAN pad.
[] Using tile INCREASE or DECREASE
pads, enter tile desired clean time.
[_
Press tile START TIMEpad. Tile
earliest start time you can set will
appear in the displ W.
_-] Using tile INCREASE or DECREASE
pads, enter tile time of dayyou want
tile clean o<:le to start.
[_] Press the STARTpad.
Tile door locks automatically. Tile display
will show the start time. It will not be
possible to open the oven door until
the temperature drops below the lock
temperature and the LOCKED DOOR
light goes off.
Tile oven shut_s off mlmmatically when
the clean (?,cle is coznplete.
When tile LOCKED DOORlight is off, open
tile door.
After a Clean Cycle
You may notice some white ash in tile
oven. Wipe it up with a dmnp cloth alter
tile oven cools.
If whitespotsremain, r emove themwith a soap-
filledsteel woolpadandrinsethoroughly with a
vinegar a nd watermixture.
These deposit.s are usually a salt
residue that cannot be removed by
the clean _?_cle.
If the oven is not clean alter one clean
(?,cle, repeat file (?,cle.
You cannot set tile oven for cooking
until tile oven is cool enough for the
door to unlock.
While file oven is self:cleaning, you
can press tile CLOCK pad to display
tile time ofd W. To remm to tile
clean countdown, press tile COOKING
TIME pad.
ffthe shelves becozne hard to slide,
apply a small amount of vegetable oil or
cooking oil m a paper towel and wipe
tile edges of tile oven shelves with tile
paper towel.
21