Interactive Status; Figure 4-10 Interactive Status Front Panel Display - Motorola DCH3200 Installation Manual

All-digital high-definition cable receiver
Hide thumbs Also See for DCH3200:
Table of Contents

Advertisement

4 DIAGNOSTICS

Interactive Status

This diagnostic describes the interactive information that is displayed only when Thin
Client platform is running. The information on the OSD and front panel is updated at
least once every 5 seconds while the diagnostic is displayed. This is an example of a
code module display with status descriptions:

Figure 4-10 Interactive status front panel display

The Interactive Status fields are:
Field
IP Address
UPM
Upstream
ID
Downstrea
m ID
State
Description
The IP address in dotted-decimal format xxx.xxx.xxx.xxx assigned by the NC 1500 to the
DCH3200. 0.0.0.0 is displayed if the IP address is not configured or unknown.
The upstream modem address value is the same as the terminal ID assigned by the
DAC 6000. It is a unique, system-generated, eight-digit integer between 1 and 16777215.
00000000 is displayed when the UPM is not configured or if it is unknown.
A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the DCH3200.
0000 is displayed if the Upstream ID is not configured or if it is unknown.
A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the DCH3200.
0000 is displayed if the Downstream ID is not configured or if it is unknown.
The interactive status of the DCH3200:
Front
OSD
Panel
U
UNCONFIG
C
MAC_CONNECT
Description
The DCH3200 is not configured for the interactive system,
and the platform should run as pre-interactive.
The DCH3200 is waiting to establish connection to MAC PID
Stream.
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dch3000

Table of Contents