Kenwood TK-7100 Instruction Manual page 11

• Monitor
Press momentarily to turn the transceiver signalling OFF. Press again to
return to normal operation. Also, press and hold for 1 second to unmute the
speaker. Press again to return to normal operation. Refer to page 18 for
details.
• None
No function is programmed onto the key.
• Operator Selectable Tone (OST)
Press to enter OST (Operator Selectable Tone) Select mode. Press again to
exit OST Select mode. Refer to page 18 for details.
• Scan
Press to begin scanning the transceiver channels. Press again to stop
scanning. Refer to page 10 for details.
• Talk Around
Press to communicate with other transceivers without the use of a repeater.
Press again to return to normal operation. Refer to page 17 for details.
• Trunking Group Code Select
Press to increase the Trunking Group Code memory number while operating
the transceiver in SmarTrunk
operating the transceiver in a non-trunking group.
®
mode. This key will not function while
7