Bosch EN5040-T Installation

Intrusion Alarm Systems | EN5040-T High-power Repeater
EN5040-T High-power Repeater
www.boschsecurity.com
The line-powered 900 MHz EN5040‑T High‑power
Repeater receives, decodes, and re-transmits signals
from Inovonics EchoStream platform transmitters. This
technology uses diversity reception and advanced
signal processing to reduce dead spots in transmission
areas. Each repeater acts as a range expander for any
transmission, allowing the installation to scale from
smaller commercial sites to large campuses with
several buildings. Each repeater includes an on-board,
state-of-the-art lithium-ion back-up battery. The
EN5040‑T High‑power Repeater includes a
transformer.
System overview
Powered by Inovonics
The Inovonics EchoStream platform, powered by
Inovonics wireless mesh network technology, ensures
superior range, reliability, and scalability for
commercial applications. Using a wide range of
transmitters and repeaters, this proven technology
provides flexibility and performance to meet the most
stringent requirements. This exclusive protocol is
available only on Inovonics EchoStream products.
Wireless 900 MHz Band
The Inovonics EchoStream platform sends redundant
information on several multi-frequency channels within
the FCC Part 15 900 MHz band, providing superior
Easy installation; no wires or programming required
u
Supervision for low battery, loss of line power,
u
tamper, and jams
Expanded coverage by utilizing multiple repeaters
u
Self-configuring
u
Sophisticated signal management
u
range and reliability. In comparison, systems that use a
single frequency technology can only send information
on one narrow band channel. Any interference within
the band can cause missed signals. With wireless
registration, it is easy to add this technology to any
application.
Repeater Network
1 1
1 2
Use multiple repeaters to create a mesh network.
1 3