Automatic Roasting - GE Spacemaker II JEM31L Use And Care Manual

Automatic Roasting

Auto Roast uses the temperature
probe to cook to the desired
serving temperature. Unlike
a single power level, Auto Roast
uses up to 3 power settings which
automatically switch during
roasting, thus providing even,
tender cooking results without
overcooking.
Just as in conventional roasting,
only tender roasts should be Auto
Roasted until specified internal
temperatures are reached.
Less tender roasts should be
microwaved by time, according to
the cookbook which comes with
your oven.
Preparing Roasts for
Auto Roasting
instructions for proper use of
cooking bag. ) Insert probe through
cooking bag horizontally into the
center meaty area not touching
bone or fat. Make sure the handle
does not touch the food or top or
sides of the oven.
I
1
the right. Insert cable end of' probe
How to Auto Roast Beef
Roast to Medium
1. Touch AUTO ROAST pad.
"ROAST" appears on the display
Touch number pad 1. "1" and the
selected doneness code—in this
display. "CODE" flashes. After 4
seconds, "START" flashes on the
display. Touch START. (See "Auto
Roast Guide" for complete list of
recommended codes. )
Note: By touching the AUTO
ROAST pad during cooking, the
meat's internal temperature will be
displayed. ("COOL" will be
displayed until meat reaches 90°F.)
I
When pad is released, doneness
code reappears on the display.
2. When you \elect Auto Ro~\t
4 beeps and "TURn jlashes on
the display when lt s time to turn
the rodst over After you turn the
START (Note Oven contlnue$ to
not roa$t 1s turned over )
3. After a pre programmed food
temperature IS reached, oven beeps
4 times and "HOLd" ~ppedr~ on
the d]~play
4. Food WIII be held ~t thl~
temperature for 60 mlnute~ The
oven then beepi 4 tlme~ ~nd
"End appear~