On(G)/Standby(R) Indicator - Panasonic PT-LW271U Operating Instructions Manual

Powering ON/OFF

ON(G)/STANDBY(R) indicator

The ON(G)/STANDBY(R) indicator informs you the status of the power. Confirm the status of the
<ON(G)/STANDBY(R)> indicator before operating the projector.
Indicator status
No illumination
Red
Blinking *
Green
 1: When [LAN (Standby)], [VGA Out (Standby)], [In Standby Mode (Audio)] are all set to [Off].
 2: When one or more among [LAN (Standby)]/[VGA Out (Standby)]/[In Standby Mode (Audio)] is/are set to [On].
Note
When the <ON(G)/STANDBY(R)> indicator is blinking in red, the internal fans start to operate and the projector starts
z
cooling.
26
- ENGLISH
The power plug is not connected to the outlet.
The power is switched off. (Standby mode)
Lit *
1
Press < v / b > to start projection.
Slow The power is switched off. (Standby mode)
2 Press < v / b > to start projection.
The projector is preparing to switch off the power.
Blinking
The power is switched off after a while. (Changes to the standby mode.)
Lit The projector is in the projection status.
Blinking The projector is preparing for projection.
<ON(G)/STANDBY(R)> indicator
Status